Anaesthesia And Critical Care

1. Simplifies procedure for sampling of tracheal fluids 2. Secure, sterile bottle ensures accuracy of culture tests 3. Vacuum control connector allows easy and quick sampling procedure 4. Graduated suction tube allows a reading for depth of intubation

1. Used in mechanically ventilated and laryngectomy patients to heat and moisturize the air and help prevent complications. that arise when patients lose the ability to breathe through their nose and upper airway. Captures heat and moisture on expiration and returns it to the patient in inspiration 2. Suitable for spontaneously breathing patients with a tracheostomy tube 3. Electrostatic filter with 99.99% filteration capacity 4. Lightweight, compact design reduces circuit weight 5. Low resistance to flow reduces work of breathing 6. ISO standard 15 mm and 22 mm fitting connects to breathing circuit 7. Supplied clean and individually packaged 8. Available in adult and paediatric options

1. Used to maintain a patient airway and mechanically ventilate patients 2. Made from a special non-toxic PVC coated with silicon elastomer which forms a bonded film over this tube and balloon. 3. 100% Phthalate free. 4. The tube is coated with non-stick, self-lubricating Silicon elastomer ( Elastosyl) which forms a thin film on the surface. 5. Elastosyl reduces the coefficient of friction by 80%, Reducing trauma significantly. 6. Elastosyl coating forms a non-stick layer on the balloon preventing it from sticking to the trachea. 7. Elastosyl offers a 100 % more bio-compatible surface to the tube and is much safer for the body. 8. Low pressure high volume cuff provides excellent seal

1. Supraglottic, non-invasive airway management device 2. Made from non toxic, non irritant medical grade Polymer 3. Anatomically engineered mask provided with separate inflation line. 4. Provided with universal 15 mm connector. 5. Marking provided along the length to facilitate identification of tube position 6. Pilot balloon to check inflation & deflation of cuff. 7. ETO sterile and pyrogen free

1. Used to secure and open airways for patients in case of emergencies 2. Provided with rotatable flange for easy securing and pulling out. 3. Made from soft, non-irritant medical grade PVC 4. Anatomically designed with smooth round edges, thin wall and kink resistance for maximum patient comfort 5. E.T.O. sterile & pyrogen free. For single use only

1. Specially designed nebulizer chamber with nebulization rate of approximately 3 cc in 10 minutes. 2. Average particle size generation is approximately 2 microns. 3. Complete kit consists of: Nebulizer mask, Nebulizer chamber and 210 mm Star Lumen Tube. 4. Sizes : Adult and paediatric

1. Used to maintain a patent airway and mechanically ventilate patients 2. Made from non-toxic, non-irritant medical grade PVC 3. Preformed tubes reduce the risk of kinking and improve access to the operative field 4. Tube can be temporarily straightend for ease of suctioning 5. Smooth polished murphy eye, distal end and tapered balloon end for atraumatic intubation and extubation 6. Accurate and safe positioning ensured by graduation marks and tip-to-tip radiopaque line 7. High volume / low pressure cuff ensures efficient low pressure cuff seal (For cuffed tubes) 8. Universal 15 mm connecter at proximal end 9. E.T.O sterile and pyrogen free. For single patient use

1. Provided with Suction & Bronchoscopy Ports. 2. Compatible with all Breathing and Ventilator circuits. 3. Double swivel connector and flexible tubing provides mobility and flexibility to the patient end of the circuit. 4. The tubes are made of a special flexible co-polymer and have a minimal compliance with low dead space volume. 5. The catheter mount is fitted with a double swivel connector 6. Each catheter mount has a 22 mm female / 15 mm male end to connect to the breathing system and 15 mm female end to connect to the endotracheal tube or laryngeal mask.

1. Used to maintain an unobstructed oro-pharyngeal airway 2. Made from rigid, non-toxic medical grade PVC 3. Colour coded in-built bite blocks to avoid airway occlusion and biting of tongue

1. Used along with Endotracheal Tube to aid during intubation 2. Smooth plastic coated with flexible malleable aluminum design, allows the stylet to be easily adapted to any desired shape 3. Soft distal tip to reduce the possibility of intubation damage 4. Smooth surface for ease in introduction and removal from ET tube 5. Clean packed

1. Used to maintain a patent airway and mechanically ventilate patients 2. Made from non-toxic, non-irritant medical grade PVC 3. Uniform spiral metal-reinforced tube wall to prevent the tube from kinking 4. Reinforcement supports tube position and verification during X-ray 5. Accurate and safe positioning ensured by graduation marks and tip-to-tip radiopaque line 6. High volume / low pressure cuff ensures efficient low pressure cuff seal (For cuffed tubes) 7. Universal 15 mm connecter at proximal end 8. Recommended use of bite block / Guedel airway 9. E.T.O sterile and pyrogen free. For single patient use

A comprehensive range of adult high concentration mask also known as partial and non rebreathing masks These masks can provide concentrations of oxygen up to 80% at flows of 10-15 l/min these values are approximate and depend on the patients breathing pattern

Venturi Mask used to deliver a known oxygen concentration to patients on controlled oxygen therapy. Oxygen Concentration: 24% (Blue), 28% (yellow), 31% (white), 35% (green), 40% (pink), 50% (orange).

Silicone Resuscitation Adult (1500 ml) Airways Sizes 2,3,4, No. Guedel Airways - 2,3,4 No. Mouth Opener Hand Suction Oxygen Tube Oxygen Reservoir Bag with Valve

1. The Sterimed endotracheal tube or ET tube has a smooth inside/outside surface for ease in intubation, extubation and suctioning. 2. The Sterimed endotracheal tube or ET tube has smooth polished murphy eye, distal end and tapered balloon end for atraumatic intubation and extubation. 3. The Sterimed endotracheal tube or ET tube is kink resistant inflation tube to ensure patient safety during cuff inflation and deflation. 4. Radio opaque line and markings on the Sterimed endotracheal tube or ET tube facilitate identification of tube position. 5. The Sterimed endotracheal tube or ET tube has a universal 15 mm connecter at the proximal end. 6. The Sterimed endotracheal tube or ET tube is E.T.O Sterile and pyrogen free. It is meant for single patient use only.

1. Used to maintain a patent airway in long term mechanically ventilated patients 2. Made from a special non-toxic medical grade PVC 3. Special suction port for removal of subglottic secretions using syringe/suction minimize the risk of VAP(Ventilator Associated Pneumonia) 4. Extra smooth, non-adherent inside/outside surface for ease in intubation, extubation and suctioning 5. Kink resistant, thin-walled, thermo-sensitive tube. Softens at body temperature 6. Smooth polished murphy eye and distal end for atraumatic intubation and extubation 7. Radio opaque line and markings provided to facilitate identification of tube position 8. Universal 15 mm connecter at proximal end 9. E.T.O Sterile and Pyrogen free. For single patient use

1. Used to maintain a patent airway through tracheostomy and mechanically ventilate patients 2. Made from non-toxic, non-irritant, medical grade clear PVC 3. Kink resistant, thin-walled, thermo-sensitive tube, softens at body temperature 4. Lockable obturator with facility to insert guide wires to facilitate intubation using the widely accepted Seldinger guide wire technique 5. Anatomically designed tube and obturator with extra smooth and curved distal end for atraumatic intubation and extubation 6. Smooth inside/outside surface for ease in intubation, extubation and suctioning 7. Kink resistant inflation tube to ensure patient safety during cuff inflation and deflation 8. Radio opaque line and markings provided to facilitate identification of tube position 9. Universal 15 mm connecter at proximal end 10. E.T.O Sterile and Pyrogen free. For single patient use

1. Used for efficient oxygen administration to patient 2. Made from soft, non-toxic, medical grade PVC 3. Elastic strap and aluminum nose clip for proper adjustment of mask 4. Multi-channel tube ensures regular supply of oxygen even if the tube is accidently kinked 5. Proximal end of tube provided with universal connecter for easy connection with oxygen source

1. Used for efficient oxygen administration to patients 2. Made from soft, non-toxic, medical grade PVC 3. Twin nasal tips ensure equal volume of oxygen to both nasal passages for greater patient comfort 4. Multi-channel tube ensures regular supply of oxygen even if the tube is accidently kinked 5. Proximal end of tube provided with universal connecter for easy connection with oxygen source

1. Used for removal of secretions from the patient mouth, trachea and bronchial tube 2. Made from non-toxic, non-irritant medical grade PVC 3. Lateral eye at distal end for effective suctioning 4. Proximal end of tube provided with universal connecter for easy connection with suction source 5. Optional: Thumb controlled, Finger tip controlled, Atraumatic tip 6. Available with graduation

1. Used to mainitain ventilation and oxygen therapy while suctioning in mechanically ventilated patients 2. Minimises the risk of Ventillator Associated Pnemonia (VAP) 3. Made from non-toxic, medical grade PVC 4. Kit comes with 3 easily replaceable catheters, minimizing the need to replace entire suction system every 24-72 hrs 5. Catheter with lateral eyes, smooth tip and depth markings for maximum patient comfort 6. MDI port provides an effective, quick and convenient way of drug delivery 7. Irrigation port with one way valve allows lavage and irrigation of the suction catheter 8. On/off valve allows suction catheter tip to be isolated and creates an enclosed cleaning chamber 9. Transparent connectors and durable sleeve facilitates catheter manipulation and prevents infiltration of blood and sputum 10. 360 swivel elbow enables rotation for enhanced patient comfort and reduces torque

1. Provides rigidity to endotracheal tubes to facilitate endotracheal intubation 2. Ultra smooth surface for low friction 3. Atraumatic angled tip for ease of intubation and to minimise risk of patient trauma 4. Marking provided along the length to facilitate identification of tube position 5. Angled tip for ease of intubation 6. Vented lumen for oxygen feed

1. Soft cushion creates a gentle, low pressure seal with patients face, maximize patient comfort 2. Non-toxic PVC, available with scented and unscented

Capacity of Delivering Flows : 10-80 liters in adult mode Oxygen concentration : (Fio2) from 21 to 100% Oxygen flow rate : up to 60 liters per minute

Sizes : Adult (L) Shape : Convex Shape

Moisture Loss- 13.2mg H2O/I. Calculated Moisture Return- 26mg H2O/I. Resistance at 30L/min - 0.2 cm H2O & Resistance at 60L/Min - 0.7 cm H2O. Compressible Volume - 19 ml & Weight - 8 g. Connectors - 15F & Minimum tidal Volume>50ml.

HME hygroscopic, bacteriostatic, microwell paper media provides optimal moisture output with low flow resistance. Offered in a variety of configurations to meet all patient size, tidal volume, and humidification needs.